PROGRAMMING MACHINE FUNCTIONS
PREBREWING
With the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings out the full
aroma of the coffee and lends it an excellent fl avour. It is
possible to choose either “enabled” or “disabled”.
END
PROGRAMMING
This procedure serves to activate all the settings made.
Prebrewing enabled (ON).Press the button to set the
function.
Prebrewing disabled (OFF).
Turn the machine back on
to activate the programmed
functions.
Turn the machine off.
RINSING
When this function is enabled, the internal machine circuits
will be rinsed immediately after the warming-up phase to
ensure that coffee is prepared with fresh water only.
Rinsing enabled (ON).Press the button to set the
function.
In all new appliances this function has already been
enabled in the factory.
Rinsing disabled (OFF).
30
To Next Page
Loading...
