Need help?Do you have a question about the SAF CFM-LM Series and is the answer not in the manual?
Provides a general overview of the CFM-LM digital microwave radio product family and its applications.
Outlines the primary operational and maintenance facilities of the CFM-LM microwave radio system.
Details the characteristics of various CFM-LM Indoor Unit (IDU) models available.
Describes the characteristics of the CFM-LM Outdoor Unit (ODU) models, including frequency bands.
Introduces the Outdoor Unit (ODU) and its relationship with the antenna in a CFM site.
Describes the CFM-LM Radio Unit (ODU) and its external features and connectors.
Details the functional blocks and internal architecture of the ODU.
Explains the function and operation of the ODU-IDU coaxial cable interface.
Lists the channel frequencies for CFM-7-LM radio systems according to ITU-R recommendations.
Lists the types of antennas offered for CFM site installation by SAF Tehnika and COMHAT-PROVEXA.
Introduces the Indoor Unit (IDU) as a mandatory component of the CFM-LM microwave radio system.
Explains the functional blocks and architecture of the CFM IDUs.
Explains the function and operation of the IDU cable interface.
Describes the 50 Ohm coaxial cable used to interconnect the Indoor Unit and the Outdoor Unit.
Outlines the goals and feature-rich functionality of the CFM-LM management system.
Details the physical and logical interfaces for managing CFM-LM equipment.
Describes management features including RS-232, Ethernet, Telnet, and Web interfaces.
Provides general technical parameters for CFM-LM ODU and IDU models.
Lists guaranteed receiver thresholds at the antenna port for various ODU models and bit rates.
Details power consumption and supply requirements for the terminal (ODU+IDU).
Specifies environmental conditions (temperature, humidity, radiation, wind) for IDU and ODU.
To Next Page
General