Safavieh Furniture DCH1001 User Manual

PIECE QUANTITY
A 2X
B 2X
C 2X
H1 4X
H2 8X
H3 4X
H4 4X
H5 4X
H6 1X
H7 1X
Model# DCH1001
Product Dimenions: 17.3"W x 21.1" D x 33.5" H
BARREL NUT
CROSS BOLT
M6 x 80mm
HEADLESS BOLT
M8 x 70mm
SEMICIRCLE WASHER
M8 x 30mm
NUT
M8
ALLEN KEY
DESCRIPTION
PICTURE
CHAIR SEAT
SPANNER
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening.
Part List and Hardware List
CHAIR BACK
FRONT LEG
Ø10x45

Safavieh Furniture DCH1001 Specifications

General

Brand	Safavieh Furniture
Model	DCH1001
Category	Indoor Furnishing
Language	English

Summary

Care and Maintenance

Assembly Preparation and Notices

Important Notices

Pre-assembly checks including part verification, assembly surface, and periodic tightening.

Preparation Steps

Verify all parts are present and undamaged before assembly. Estimated assembly time is 10 minutes.

Assembly Steps

Step 1: Attach Front Legs

Attach two front legs (C) using four headless bolts (H3) per leg.

Step 3: Connect Seat and Back

Connect chair seat (A) and back (B) using barrel nuts (H1) and cross bolts (H2).

Step 4: Secure Seat and Back

Secure the chair seat and back assembly using semicircle washers (H4) and nuts (H5).