Safavieh Furniture LANDEN FLL4003A User Manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.
this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit,
contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat
this safety feature.
CARE AND MAINTENANCE
Model# FLL4003A
Product Dimensions: 15"L X 15"W X 63.5"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-
brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe
use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Pipe 1X
B Lamp body 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
1/2

Safavieh Furniture LANDEN FLL4003A Specifications

General

Brand	Safavieh Furniture
Model	LANDEN FLL4003A
Category	Home Lighting
Language	English

Summary

Product Safety Warnings

Polarized Plug Safety Feature

Explains the polarized plug as a safety feature to reduce electric shock risk.

Important Safety Instructions

Guidance on ensuring all parts are present, assembling on a soft surface, and safe use.

Care and Maintenance

Cleaning Procedures

Instructions for unplugging the lamp, dusting shades, and cleaning bases.

Assembly Preparation

Pre-Assembly Checks

Ensuring all parts are present and undamaged before starting assembly.

Bulb Type Recommendation

Specifies the recommended bulb types and wattages for the luminaire.

Assembly Steps

Step 1: Assembling Lamp Body

Instructions for screwing the lamp body components onto the base.

Step 2: Attaching Shade and Finial

Guidance on inserting the harp, attaching the shade, finial, and bulb.

Step 3: Stability Check

Final step to place the light on a level surface for stability check.