Safavieh Lighting Lombard User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X H Harp 1X
E Neck 1X I Shade 1X
F Saddle 1X J Finial 1X
G Socket 1X K Bulb 1X
Part List and Hardware List
Model# LIT4178A
Product Dimensions: 14"D X 60 "H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.

Safavieh Lighting Lombard Specifications

General

Brand	Safavieh
Collection	Lombard
Category	Home Lighting
Base Material	Metal
Base Color	Brass
Switch Type	On/Off
Bulb Included	No
Finish	Antique Brass
Number of Lights	1
Dimmable	No
Voltage	120V
Wattage	60W

Summary

Care and Maintenance Instructions

Important Safety Instructions

Assembly and Electrical Safety Guidelines

Guidelines for safe assembly, electrical shock prevention, and proper plug usage.

Part and Hardware List

Preparation and Assembly Steps

Step 1: Initial Assembly and Cord Threading

Align parts, thread cord, tighten connections, and attach base and tubes.

Step 2: Attaching Harp, Shade, and Bulb

Attach the harp to the saddle, place the shade, secure with finial, and insert the bulb.

Step 3: Final Placement and Stability Check

Place the lamp on a level surface and check for stability.