Safavieh CPT1009A User Manual

NOTICE














C O U T U R E
200
Model# CPT1009A
Product Dimensions:32" W x 36.2" D x 30.4" H

ith small
n or

WOODCARE
Adhesive felt pads should always be applied to areas of furniture which make direct contact
the furniture lies. Objects placed on articles of furniture should rest on nonabrasive material
rubber are known to discolor and damage the wood surfaces on which they rest. Wipe up
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wax which should be used on
a regular basis to provide additional protection from scratches and spills. How often you apply
the wax depends on how much wear the furniture receives.

Safavieh CPT1009A Specifications

General

Brand	Safavieh
Model	CPT1009A
Category	Indoor Furnishing
Language	English

Summary

Notice and Preparation

Assembly Guidance

Preliminary instructions covering part checks, assembly surface, periodic tightening, and customer support contact.

Product Safety Warnings

Key warnings regarding weight capacity and proper use of bolts/screws.

Parts and Hardware List

Component Identification

Lists and describes all necessary parts (A, B, C, CSH1, CSH2) and hardware (HW1, HW2, HW3) for assembly.

Assembly Instructions

Step 1: Attach Back Frame

Connect Back Frame (A) to Seat Frame (B) using Screw (HW1) and Allen Key (HW3).

Step 2: Attach Leg Side Frame

Insert Leg Side Frame (C) into Seat Frame (B) and secure with Bolt (HW2) and Allen Key (HW3).

Step 3: Secure Back Frame

Continue attaching Back Frame (A) using Bolt (HW2) and Allen Key (HW3).

Step 4: Place Cushions

Position Back Cushion (CSH1) and Seat Cushion (CSH2) onto the assembled chair.

Step 5: Final Placement

Cautionary note that the chair must be placed on a flat, level surface.

Care and Maintenance

General Cleaning

Advice on storing outdoor furniture, dusting, and cleaning spills with a damp sponge.

Woodcare Recommendations

Use of felt pads, avoiding abrasive materials, and cleaning/polishing with soft cloths and wax.