Safeguard Supply LRA-EX1000 User Manual

Phone: (678) 214-4212 |email: info@safeguardsupply.com
2260 Moon Station Ct. NW #110 | Kennesaw, GA 30144 USA
SAFEGUARD SUPPLY CONTACT INFORMATION
C
a
ncel
Output
delay
Wire Clip
Relay
Output
control
5
2
On
Off
Battery compartment
Battery cover
Speaker
Zone LED
Flasher
Zone selector
button
Melody
selector button
Volume control
Function Switch
PARTS & FUNCTION
LRA-EX1000 & LRA-EXTX User Manual
THINGS TO KNOW PRIOR TO USE
• Each LRA-DCRX (receiver) can pair with a total of four (4) wireless transmitters
• Once four (4) transmitters have been added to the receiver you cannot add another
unless you delete a transmitter from one of the 4 zones.
• There is no limit to the number of receivers you can pair with a transmitter.
• The receiver is powered by c-sized alkaline batteries or by a plug-in transformer (not
included).
• The receiver has 3 (three) modes of operation: 1) chime only, 2) chime and strobe, and 3)
strobe only. These options are changed using the selec
tor switch on the side of the unit.
• The volume is adjustable using the knob inside the cover of the unit.
• Range from transmitter (push button, motions sensor, etc.) is up to 1,000 ft. line of sight.
Environmental objects such as metal, concrete, etc., will diminish the range.
• Powered by 3 x C-sized alkaline batteries (not included). Optional plug-in power cord is
available.
• Volume control - zero to 90 dB.
• Flashing strobe can be turned on or off. Sound may be turned on or off.
• Variety of sounds and melodies to choose from.
• Pair this receiver with any LRA transmitters.
• Indoor rated only.
'C
1.5
' S
V
ize
'C
1.5
' S
V
ize
1.5' S
'CVize
3 x 'C' size
BATTE
RY INSTALLATIO
N
LRA-
DCRX Chime Receiver
LRA-EX1000 Kit Includes: LRA-DCRX (receiver) + LRA-EXTX (chime extender)
The LRA-EXTX must be programmed to a compatible receiver.
All products in the LRA series are compatible with one-another. Systems may be expanded
by adding transmitters (push buttons, PIR motion sensors, magnetic door contacts, and
outdoor driveway s
ensors) and /or adding receivers.
BASIC FEATURES:
Pl ease Note: All AC-powered chimes work off a low-voltage power transformer.
For safety we recommend disconnection electrical power from house c h i me before
installation. If you are not comfortable doing this, we recommend hiring an electrician.
LED Indicator
Cable duct
Wiring hole cover
Battery
compartment
Cover
This relay transmitter can work
any devices with 9 to 18V AC .
Wired Chime
Transmitter
LRA-EXTX Chime Extender
CR123A

Safeguard Supply LRA-EX1000 Specifications

General

Brand	Safeguard Supply
Model	LRA-EX1000
Category	Intercom System
Language	English

Summary

Basic Features

Things to Know Prior to Use

LRA-EXTX Wire Setup and Code Pairing

LRA-EXTX Wire Setup

Connect the LRA-EXTX chime extender wires to the wired doorbell.

Code Pairing and Melody Selection

Steps to pair transmitters with the receiver and select melodies for zones.

Transmitter and Connection Testing

Test the Transmitter

Press the transmitter button to test its signal to the receiver.

Test the Connection

Press the doorbell button to test the transmitter-receiver link.

Receiver Configuration and Indicators

Delete a Transmitter from a Zone

Procedure to remove a paired transmitter from a specific zone.

Change Melody for a Zone

Steps to select a different melody for an existing zone.

Battery Low Indicator

Indicators for low transmitter and receiver battery status.

Support and Regulatory Information

Technical Support

Contact information for product assistance.

Warranty Information

Details on product warranty coverage and duration.

FCC Statement

Regulatory compliance information for radio frequency devices.