SAFETRAN systems 3000 GCP - User Manual

PRINTED IN U.S.A.
SOFTWARE UPGRADE INSTRUCTIONS
INSTALLING SOFTWARE RELEASE 9V309-01E IN THE
80115 DATA RECORDER MODEL
(FOR MODEL 3000 GCP)
May 2002 (Revised December 2008)
DOCUMENT NO. SIG-00-01-17
VERSION C
Safetran Systems Corporation, California Division
10655 7th Street, Cucamonga, California 91730
1-800-793-SAFE
Copyright © 2002 Safetran Systems Corporation

Summary

Software Version Identification

Locating Flash PROM U10

Steps to identify the current Data Recorder software version by locating flash PROM U10.

Upgrade Preparation and Requirements

When and Where to Upgrade

Information on where and when the new software version can be uploaded into the 80115 module.

Parts and Tools Required

List of necessary components and tools for performing the software upgrade procedure.

Software Upgrade Procedure

Initial Steps and Connections

Verify GCP POWER switch, connect PC to 80115 module, and prepare software files.

Boot Program Download and Update

Procedure for downloading and updating the boot program using specific switch and prompt commands.

Setup Program Flash Memory Update

Steps to update the flash memory by confirming checksum and setting the POWER switch.

Finalizing the Update

Steps to affix new revision sticker, return module, and set final parameters to conclude the update.

SAFETRAN systems 3000 GCP Specifications

General

Brand	SAFETRAN systems
Model	3000 GCP
Category	Data Loggers
Language	English