C. Basic Use
11
Remove LATCH Belt
from Packaging
Fold Out Kickstand
Rotate kickstand down
and out, then push up to
lock.
Kickstand
MUST be
folded out in order to
use this seat.
Store LATCH
Store Top Anchorage
Strap (Tether)
2.
1.
3.
4.
continued on next page.
C-2 Preparing Child Restraint to Fit
Your Child
You MUST make these adjustments with your child
before you install the child restraint in the vehicle.
Release Chest Clip
Press on chest clip release
button and pull apart.
6.
Unbuckle Harness
Press red button.
Pull buckle tongues out.
Place harness straps out
of the way.
7.
Place Child in Child
Restraint
Place the child’s bottom
and back flat against the
restraint.
This will allow the harness
straps to be properly
tightened.
8.
Loosen Harness
Push down on the harness
release lever (under flap on
the front of restraint) while
pulling out on the harness.
5.
12
To Next Page
Loading...
