SAFETY SIREN HS71512 - User Manual

http://radongasdetectorreviews.com Page 1
Pro Series3 Radon Gas Detector HS71512 User
Guide
CONTENTS
1. Radon Gas – Facts and Concerns
2. Placement of the Detector
3. Installation of the Detector
4. Areas to be Avoided
5. Display Features
5.1 Short-Term Display
5.2 Long-Term Display
6. Initial Start-Up
7. Audible Alarm
8. Menu Button Operation
8.1 Long-Term / Short-Term
8.2 Test
8.3 Alarm Mute On / Off
8.4 Reset / Clear Memory
8.5 Calibration
9. Error Messages
9.1 Err3
9.2 Err4
10. Specifications
11. One Year Warranty

Summary

Radon Gas Facts and Concerns

Placement of the Detector

Installation of the Detector

Areas to be Avoided

Display Features

Short-Term Display

Average radon levels over the past seven days, indicated by a green "S" LED.

Long-Term Display

Average radon levels since last reset, indicated by a green "L" LED.

Initial Start-Up

Audible Alarm

Menu Button Operation

Long-Term; Short-Term Button

Changes display between short-term and long-term radon readings by pressing the menu button.

Test

Assesses the audible alarm by pressing and holding the menu button for 5 seconds.

Alarm Mute On;Off

Silences the audible alarm by pressing and holding the menu button for 15 seconds.

Reset;Clear Memory

Clears short-term and long-term readings memory, mandatory when moving the detector.

Calibration

Note for professionals regarding EPA approval and annual calibration recommendations.

Error Messages

Err3 - Noise Error

Caused by electrical noise interference from other electronic items.

Err4 - Sensor Error

Occurs on sensor failure during self-test; suggests unplugging or replacement.

Specifications

One Year Limited Period Warranty

SAFETY SIREN HS71512 Specifications

General

Brand	SAFETY SIREN
Model	HS71512
Category	Gas Detectors
Language	English