Safevieh Outdoor PAT7017 User Manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
H1
H2
H3
H4
H5
H6
H7
H8
H9
Seat Frame
Leg frame
Front frame
Wooden pegs
Bottom frame
Strut
Title frame
Back frame
Circle hook
Screw
Screw
Screw
Hook
Allen key
2X
1X
1X
1X
1X
1X
14X
10X
9X
1X
1X
5 mm
1X
5X
2X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7017
Product Dimensions:50" W x 24" D x 35" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
M7X90
M4X15
M4X15
M10X35
H3
Page 01 of 03

Safevieh Outdoor PAT7017 Specifications

General

Category	Outdoor Furnishing
Model	PAT7017
Brand	Safevieh
Material	Acacia Wood
Weight Capacity	250 lbs
Cushion Included	Yes
Weather Resistant	Yes

Summary

Care and Maintenance

Assembly Notice

Part List and Hardware

Assembly Preparation and Steps

Preparation

Verify all parts are present before beginning assembly. Estimated assembly time is 40 minutes.

Step 1

Attach leg frames (A) with back frame (C), front frame (D), and title frame (B) using wooden pegs (H2) and tighten with Allen key (H9).

Step 2

Pull down the arrow component (E).

Step 3

Attach seat frames (H1) to the main structure using screws (H4, H5) and (H8).

Step 4

Assemble the strut (H7) with the bench structure.