15.Pull the diagonal section of the seatbelt around the back of the
SNUG 'N SAFE.
16.Thread the diagonal section of the seatbelt through the diagonal belt hook as
17.indicated in 17.
SAFEWAY
18 (A). Tighten the seatbelt by first pulling here ...
18 (B). and across towards you as indicated.
FINAL CHECKLIST
No matter how well the child restraint seat has been designed, ultimately your
child's safety depends on you. Read this final checklist once you have fitted the
SAFEWAY SNUG 'N SAFE in your car.
- Have you correctly adjusted the harness to suit your baby and the clothing
he/she is wearing?
- Have you correctly fitted the adult seatbelt around the SAFEWAY SNUG 'N
SAFE?
- Have you removed all the slack from the adult seatbelt?
Ensure that the straps holding the SAFEWAY SNUG ‘N SAFE are tight.
Your SAFEWAY SNUG 'N SAFE should now be secure.
Consult the final checklist that follows.
To remove the SAFEWAY SNUG 'N SAFE from your car simply unthread the
seatbelt from the diagonal belt guide and unfasten the seatbelt.
SNUG 'N SAFE
CAR SAFETY SEAT
SNUG 'N SAFE
INSTALLATION INSTRUCTIONS
For babies up to 10kg
IMPORTANT NOTES
REMINDER
WARNING
Ensure - that you follow the fitting instructions carefully.
Ensure - that you store these instructions in a safe place for future reference.
Ensure - for maximum safety that you keep your baby in the harness while
he/she is in the SAFEWAY SNUG 'N SAFE.
Ensure - that the rigid items or plastic parts are so located and installed so
they are not liable, during everyday use of the vehicle to become
trapped by a movable seat or in the door of the vehicle.
Ensure - to position the lightest passenger on the seat behind the SAFEWAY
SNUG 'N SAFE if there are no seat belts available in the car. In the
case of an accident a heavier passenger could cause more
damage/injuries to your child than a lighter one.
Ensure - that you keep the SAFEWAY SNUG 'N SAFE in a safe place when
not in use.
Ensure - that any luggage or other objects liable to cause injuries in the event
of a collision are properly secured.
Do Not - place any heavy objects on the top of the SAFEWAY SNUG 'N SAFE.
By doing this you could damage the way in which it functions.
Do Not - use any objects such as a cushion or pillow to raise the SAFEWAY
SNUG 'N SAFE off the car seat, as in the event of an accident the
SAFEWAY SNUG 'N SAFE and the car seat belts would not be able
to protect your child as they should.
Do Not - leave children unattended in your car even for a short period of time.
Do Not - allow people to play or tamper with the SAFEWAY SNUG 'N SAFE.
Do Not - leave the SAFEWAY SNUG 'N SAFE on a table or workbench when
used in the home.
Do Not - make any alterations or additions to the SAFEWAY SNUG 'N SAFE
without the approval of the manufacturer or competent authority.
Do Not - use the SAFEWAY SNUG ‘N SAFE without the cover.
Do Not - replace the seat cover with any other than the one recommended by
the manuafacturer, as it constitutes an integral part of the restraints
performance.
The interior of a vehicle can become very hot when standing in direct sunlight. It
is recommended to cover or remove the SAFEWAY Snug ‘n Safe from the
vehicle to prevent it from becoming to hot and burning your baby.
In the event of an accident, please replace the SAFEWAY SNUG 'N SAFE
and vehicle seatbelts. Although they may seem to be undamaged if you
were to have an accident the SAFEWAY SNUG 'N SAFE and the vehicle
seatbelts might not be able to protect your child as they were designed to.
The SAFEWAY SNUG 'N SAFE is only suitable for use in listed vehicles
fitted with a 3-point static/retractor safety belt, approved to UN/ECE
regulation No.16 or equivalent standard, that comply with SABS 1080.
Do not use the SAFEWAY SNUG 'N SAFE in the passenger seat if it is
equipped with an airbag.
Misuse of the SAFEWAY SNUG 'N SAFE could influence the safety of your
baby.
SAFEWAY products are distributed by :
Unimark Distributors (Pty) Ltd.
P.O. Box 912-1095
Silverton
0127
Tel : +27 12 804-1793 Fax : +27 12 804-1795
E-mail : info@safewaybabies.co.za
15
16
17
18
HOW TO CLEAN THE SAFEWAY SNUG 'N SAFE AND THE COVER
All the parts of the SAFEWAY SNUG 'N SAFE can be cleaned with mild cleaning
agents.
The cover can be washed in luke warm water with a mild detergent. Do not
tumble dry or use any solvents.
A
B
Group 0
To Next Page
Need help?
General
