For any help, kindly consult the local distributor
Please do not keep emergency keys in your safe!
Schematic drawing of case
MODEL: SAFEWELL 25EGD
INTELLIGENT ELECTRONIC LOCK SAFE
Dear valued customer:
Thank you for choosing our products! You’ve taken an important step in
organizing and protecting your most valued possessions. Every series of our
safes is professionally made and designed to provide safety. Please take
time to read and familiarize yourself with the proper operating procedures of
your new safe presented on the following pages.
Again, thank you for choosing our products!
Schematic drawing of control panel
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob(Master Key)
5. Emergency Lock Cover
6. Clear Key
7. Start & Confirming Button
12 3
MOUNTING METHOD
● Fix the safe in the place which is not easy to move.
● Drill holes for expansion bolts (or clamping screws) in the right place.
● Turn the expansion bolts counter clockwise to separate.
● Use the expansion bolts (or clamping screws) to secure the case to the wall.
● Make sure the case is mounted in place as required and then tighten all screws.
CAUTION:Use the expansion bolt when there is a concrete wall surface. Use the
clamping screw when there is a wooden wall surface.
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this equipment
at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products. Please help us to conserve the environment we live in!
Declaration of CE/E-mark conformity
This product complies with the requirement of the below directives:
EMC-Directive: 2004/108/EC, CE Marking: 93/68/EEC &
RoHS Directive: 2002/95/EC
The above declare that this product is in compliance with following standards:
EN61000-6-1:2007, EN61000-6-3:2007
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
• 33, Vas. Olgas avenue
P.O. 54641, Thessaloniki, Greece
Tel: +30 2310 850107, +30 2310 850108,
Fax: +30 2310 867835
• / www.amiridis-savvidis.gr info@morris.gr
• 45, Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: +30 210 9402064, Fax: +30 210 9402137
To Next Page
Need help?
General