Saflok Quantum MT User Manual

Quantum™ Lock Usage Instructions Pg. 1 of 2
© SAFLOK WL 5/07
Quantum
™
Lock Operation Instructions
Unlocking the Quantum™ MT™ lock from the outside
1. Fully insert your keycard into the slot.
2. Remove the keycard from the slot.
3. While the green light is flashing, turn the lever and open the door.
Unlocking the Quantum™ RFID lock from the outside
1. Bring the flat surface of your keycard near the circular RFID reader. When the keycard is close
enough to be read, the yellow light will flash on the RFID reader. You will hear the lock operate.
2. The green light will begin to flash once access has been granted.
3. Turn the lever and open the door while the green light is flashing.
FCC Warning: The users of this equipment shall not change or modify the equipment in any way, or they
could void their authority to operate the equipment under FCC rules.
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
1 2 3
Ext e r i or
Ext eri or
Ext e r i or
2
31
Exterior Exterior
Exterior
Exterior
Exterior
Exterior
1 2
3
1
2
3

Saflok Quantum MT Specifications

General

Brand	Saflok
Model	Quantum MT
Category	Locks
Language	English

Summary

Quantum MT Lock Operation: Unlocking from Outside

Insert and Remove Keycard

Procedure for unlocking the lock by inserting and removing a keycard.

Open Door with Flashing Green Light

Action to open the door when the lock's green light is flashing.

Quantum RFID Lock Operation: Unlocking from Outside

Approach RFID Reader and Observe Light

Bring keycard near RFID reader; yellow light indicates read, hear lock operate.

Confirm Access and Open Door

Green light flashes after access granted; turn lever to open door.

Locking and Unlocking from Inside

Engage Privacy Feature

Rotate the turn piece to activate the privacy feature on the lock.

Unlock Door from Inside

Simple procedure to unlock the door from the interior side.

Quantum Lock Programming with LPI Probes

MT Lock Programming

Insert probe directly into MT lock to transfer code info from LPI Device.

RFID Lock Programming

Plug LPI-R device cable into RFID reader to transfer lock code information.