Need help?Do you have a question about the Safran CMM 25 and is the answer not in the manual?
Failure to follow warnings, instructions, and procedures may result in serious injury or death.
Advice on handling dangerous situations, using tools, and general safety guidelines.
Guidelines for tandem parachute jumping, pilot conduct, and responsibility.
Specific training and qualifications needed for tandem parachute pilots.
Details for pilot and passenger harness, reserve, and main canopies.
Overview of certification process, including flight and laboratory tests.
Specifications for pilot and passenger harnesses, including fatigue, resistance, and safety factors.
Technical data for main and reserve canopies, including fabric, lines, area, and speeds.
Description of main canopy activation controls and drogue release.
Details on reserve activation, AAD, LOR II safety system, and FXC 12000.
Diagram and description of the main components and their arrangement.
Installing repeat reserve handle and adjusting pilot harness.
Instructions on arming the FXC 12000, prioritizing method 1.
Procedure for installing the FXC 12000 device into the reserve container.
Diagram showing routing of LOR+FXC system and altitude setting instructions.
Recommendations and pre-equipment views for integrated AAD installation.
Procedure for routing and adjusting the AAD cutter and control unit.
Procedure for inserting AAD assembly, stowing cables, and checking for damage.
Mandatory points for using correct loops, cords, and referring to manuals for adjustments.
Step-by-step guide for attaching the double loop using a metallic washer.
Instructions for preparing the reserve container with a closing loop, including measurements and FXC 12000 adjustment.
Detailed procedure for installing half brakes, requiring special attention.
Instructions for inspecting and packing the reserve canopy, ensuring airworthiness.
Steps for closing flaps, preparing and inserting closing pins, and sealing.
Diagrams showing correct and incorrect routing of LOR2 loops through reserve container grommets.
Step-by-step guide for installing the cutaway handle and attaching the main risers.
Procedure for installing and adjusting the main canopy locking loops.
Instructions for assembling the drogue release strap and extraction lines.
Information on the Secondary Canopy Activation CDO (Command D'Ouverture).
Description and components of the three-ring release system for passenger kits.
Instructions for mounting the three-ring release, including a caution about the counter-screw.
Procedure for installing the main canopy activation handle (CDO).
Instructions for placing the deployment bag and closing the main container.
Procedure for locking the drogue release strap and mounting the 3-ring system.
Instructions for controlling the 3-ring release system and arming the drogue release.
Instructions for adjusting the passenger harness, ensuring symmetry and comfort.
Procedure for docking the passenger to the pilot in the aircraft, including checks and comfort advice.
Classification of repairs and advice on storing equipment to protect it from damage.
Importance of regular checks and the 12-month inspection of the reserve canopy.
Detailed inspection checklist for components based on jump frequency or monthly checks.
Guidelines for harness-container repairs and using only genuine, updated accessories.
Specifications for measuring canopy lines for correct trim and performance.
Crucial warning against braking the in-board steering lines during canopy operation.
Comprehensive list of LEGEND T system components and accessories with part numbers.
List of compatible accessories for the LEGEND T system, including notes on compatibility.
Details on the mandatory certification label located on the reserve riser.
Critical warning for riggers to inspect all parachute components for damage before repacking.
Failure to follow warnings, instructions, and procedures may result in serious injury or death.
Advice on handling dangerous situations, using tools, and general safety guidelines.
Guidelines for tandem parachute jumping, pilot conduct, and responsibility.
Specific training and qualifications needed for tandem parachute pilots.
Details for pilot and passenger harness, reserve, and main canopies.
Overview of certification process, including flight and laboratory tests.
Specifications for pilot and passenger harnesses, including fatigue, resistance, and safety factors.
Technical data for main and reserve canopies, including fabric, lines, area, and speeds.
Description of main canopy activation controls and drogue release.
Details on reserve activation, AAD, LOR II safety system, and FXC 12000.
Diagram and description of the main components and their arrangement.
Installing repeat reserve handle and adjusting pilot harness.
Instructions on arming the FXC 12000, prioritizing method 1.
Procedure for installing the FXC 12000 device into the reserve container.
Diagram showing routing of LOR+FXC system and altitude setting instructions.
Recommendations and pre-equipment views for integrated AAD installation.
Procedure for routing and adjusting the AAD cutter and control unit.
Procedure for inserting AAD assembly, stowing cables, and checking for damage.
Mandatory points for using correct loops, cords, and referring to manuals for adjustments.
Step-by-step guide for attaching the double loop using a metallic washer.
Instructions for preparing the reserve container with a closing loop, including measurements and FXC 12000 adjustment.
Detailed procedure for installing half brakes, requiring special attention.
Instructions for inspecting and packing the reserve canopy, ensuring airworthiness.
Steps for closing flaps, preparing and inserting closing pins, and sealing.
Diagrams showing correct and incorrect routing of LOR2 loops through reserve container grommets.
Step-by-step guide for installing the cutaway handle and attaching the main risers.
Procedure for installing and adjusting the main canopy locking loops.
Instructions for assembling the drogue release strap and extraction lines.
Information on the Secondary Canopy Activation CDO (Command D'Ouverture).
Description and components of the three-ring release system for passenger kits.
Instructions for mounting the three-ring release, including a caution about the counter-screw.
Procedure for installing the main canopy activation handle (CDO).
Instructions for placing the deployment bag and closing the main container.
Procedure for locking the drogue release strap and mounting the 3-ring system.
Instructions for controlling the 3-ring release system and arming the drogue release.
Instructions for adjusting the passenger harness, ensuring symmetry and comfort.
Procedure for docking the passenger to the pilot in the aircraft, including checks and comfort advice.
Classification of repairs and advice on storing equipment to protect it from damage.
Importance of regular checks and the 12-month inspection of the reserve canopy.
Detailed inspection checklist for components based on jump frequency or monthly checks.
Guidelines for harness-container repairs and using only genuine, updated accessories.
Specifications for measuring canopy lines for correct trim and performance.
Crucial warning against braking the in-board steering lines during canopy operation.
Comprehensive list of LEGEND T system components and accessories with part numbers.
List of compatible accessories for the LEGEND T system, including notes on compatibility.
Details on the mandatory certification label located on the reserve riser.
Critical warning for riggers to inspect all parachute components for damage before repacking.
To Next Page
General