WE RECOMMEND SAFETY FIRST
• Carefully read all instructions
before operating and save for
future reference.
• Remove any packaging
material and promotional
labels before using the food
processor for the first time.
• Do not place the food
processor near the edge
of a bench or table during
operation. Ensure the surface
is level, clean and free of
water, flour, etc. Vibration
during operation may cause
the appliance to move.
• Do not place this appliance
on or near a hot gas or
electric burner, or where it
could touch a heated oven.
• Handle the food processor
and attachments with care
- remember the blades and
discs are razor-sharp and
should be kept out of reach
of children.
• Always make sure the food
processor is completely
assembled before
operating. The appliance
will not operate unless
properly assembled.
• Ensure the OFF button
has been pressed, and the
food processor is switched
off at the power outlet and
unplugged before attaching
the 4 blade processor, dough
blade, disc or processing lid.
• Always secure the
processing bowl onto the
motor base before attaching
the 4 blade processor, dough
blade or discs.
• Always operate the food
processor with the processing
lid securely in position.
• Do not push food into the
feed chute with your fingers
or other utensils. Always use
the food pusher provided.
• Keep hands, knives and
other utensils away from
moving 4 blade processor,
dough blade or discs.
• Do not place hands or fingers
in the bowl of the food
processor unless the motor,
4 blade processor, dough
blade or discs have come to a
complete stop.
To Next Page
Loading...
