Sagem 930 - Page 31

30
7. Call related features
Standard commands
Sequences of standard keys also permit access
to services such as call notification, call holding,
multi-conferencing, and open up additional
possibilities:
0
Reject a call holding or waiting (or
multi-conference calls).
1 End the current call holding or
waiting (or the multi-conference
calls if there are any) and accept
the call (or multi-conference calls).
1 X End the current call order number
X.
2
Place on hold the current call (or
multi-conference calls) and accept
the call holding or waiting (or multi-
conference calls).
2 X
Place on hold the multi-
conference calls except for the
current call order number X
(private call).
3
Add a call holding (or multi-
conference calls) to the current
call (or to the multi-
conference).
Tel N° Place on hold the current call
(or the multi-conference calls)
and call another telephone
number.
Note:
However, it is preferable to place the call on
hold then dial, then call; this guarantees
comfort and confidentiality (does not allow
the call holding to hear the dialling tones
whatever the configuration of the phone).
End all calls except for a
possible call waiting.