EasyManua.ls Logo

Sagem 930 - Setting the Time and Date; Install Energy Saving Mode

Sagem 930
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
9. Phone adjustment
In specific cases, manual forcing is possible.
Using the scrolling arrows, you can select:
Available networks
This menu enables you to start a search for
all available networks at the present location
and to display them.
To manually force the chosen network,
use the scrolling arrows and validate
(press ).
Preferred networks
To program, into your SIM card, a list of
preferred networks:
Use the scrolling arrows to select from the
list.
Validate.
If the network is not on the list, select the
country code then the network code (ask the
organisation from which you obtained the
SIM card).
Display
If you want the date
and time displayed
permanently on the
screen, tick the
Display box and
validate using Ok.
9.6 Setting the time and date
In this menu, you set the time and
date on your phone:
Set the hour and the minutes
required by selecting the digits
and by using the scrolling arrows
or . Press to
move to the next item.
Set the day, the month (from 1 to
12), and the year.
Validate using Ok.
9.7 Install energy saving mode
You can switch your phone into a
special standby mode, increasing its
autonomy. Using the scrolling arrows,
you can change the level of light and
the standby screen.
If you want to increase autonomy, tick
No light and Screen saver, and
validate using Ok.
To reactivate the screen, press .

Table of Contents

Related product manuals