1 - INSTALLATION AND COMMISSIONING
Installation and User Guide - N56717020101
No reproduction or communication without the written consent of
SAGEM SA
Page A1-23
)
Open a session and enter your password (to parameterize the communication function, it is
indispensable to have "supervisor" rights).
NOTE : By default, on the first commissioning, the password is empty.
)
The following menu appears:
To select a command, type the command number in "Choice ?" text zone, and press
"ENTER" key to validate your choice.
)
Choice "1" : Configuration of communication interface,
To Next Page
Loading...