Sagem F@st 1704 Quick Installation Guide

7
SAGEM F@st
TM
1704
The Wi-Fi information is marked on your
router.
3. Once you have filled in the Wi-Fi parameters,
click on Next.
4. The Internet connection screen appears.
Enter your connection ID and password, then
click on Next.
5. A summary of the completed installation
steps appear. Click on Finish to end the
installation.
You may now use your Internet access.
Wi-Fi interface integrated into your
computer
1. Once you have configured your computer’s
wireless manager, click on Next.
2. The Internet connection screen appears.
Enter your connection ID and password, then
click on Next.
3. A summary of the completed installation
steps appear. Click on Finish to end the
installation.
You may now use your Internet access.
Note
The Wi-Fi security key field only
appears if a Wi-Fi security (WEP 128,
WPA-PSK and WPA2-PSK) is
assigned to your router. The length of
this field depends on the selected
security.
Note
This information is provided by your
Internet Service Provider (ISP).
Important
Before you continue installing your
router, you must first configure your
computer’s wireless manager.
Note
This information is provided by your
Internet Service Provider (ISP).
QIG 253271827A Fast 1704_GB without WPS.book Page 7 Mercredi, 7. octobre 2009 2:47 14

Sagem F@st 1704 Specifications

General

Brand	Sagem
Model	F@st 1704
Category	Network Router
Language	English