Sagem myC5-2 - Network and Date;Time Settings

62
Settings
Phone code The Phone code menu allows you to activate the phone code so that it
is requested and checked whenever the phone is switched on if a
different SIM card is used. This code is automatically linked to the SIM
card installed when the phone is activated, for example to protect the
phone if stolen.
To activate or deactivate the phone code, select the Phone code menu
and validate.
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
Confidentiality The Confidentiality function is used to delete numbers stored in View
last calls and the SMS stored in the memory when a new SIM card is
inserted into the phone.
This menu allows the activation of automatic deletion, after power off/on,
for messages and/or calls stored in the phone.
On the Security menu, please select the Confidentiality menu and
[ Select ].
Select Activate or Deactivate and validate.
251729200_myC5-2_lu_en.book Page 62 Lundi, 4. octobre 2004 11:21 11