What to do if my Sagi Commercial Food Equipment is not working?
If your Sagi Commercial Food Equipment isn't working, there are a few things you can check: * Ensure the unit is correctly plugged in and switched on. * If it still doesn't work, replace the fuse in the plug (UK Plug). * Check the power supply.
Why is my Sagi Commercial Food Equipment temperature too high or low?
If the temperature of your Sagi Commercial Food Equipment is too high or too low, consider the following: * Too much ice on the evaporator may be the cause, so defrost the appliance. * Ensure the doors are shut properly and the seals are not damaged. * The appliance may be near a heat source, or airflow to the condenser might be interrupted; move the refrigerator to a more suitable location. * High ambient temperature could be the issue; increase ventilation or move the appliance to a cooler position. * Unsuitable foodstuffs may be stored inside; remove any excessively hot foodstuffs or blockages to the fan. * The appliance might be overloaded; reduce the amount of food stored inside.
Why is my Sagi S 900 leaking water?
If your Sagi Commercial Food Equipment is leaking water, here are a few potential causes: * The appliance might not be properly leveled; adjust the screw feet to level it (if applicable). * The discharge outlet could be blocked; clear the discharge outlet. * The movement of water to the drain might be obstructed; clear the floor of the appliance (if applicable).
How to fix a loud Sagi Commercial Food Equipment?
If your Sagi Commercial Food Equipment is unusually loud, it could be due to: * Loose nuts or screws; check and tighten them all. * The appliance not being installed on a level or stable surface; check the installation position and change it if necessary.
General| Brand | Sagi |
|---|---|
| Model | S 900 |
| Category | Commercial Food Equipment |
| Language | English |
Instructions for installing shelves or drawers into the cabinet.
Guidelines for optimal food storage within the appliance.
Procedure for powering on the appliance and initial display.
Instructions and warnings for operating the appliance doors or lids.
Overview of the thermostat panel and its functions.
Regular cleaning and upkeep procedures for the appliance.
Maintenance tasks requiring skilled personnel or specific tools.
Specific cleaning and care instructions for marble worktops.
Information regarding optional accessories and their installation.
Guide to diagnosing and resolving common appliance faults.
To Next Page