41
3. - OPENING AND CONTROL
Carefully open the package, check the content and make sure that all the parts are present
and are in good condition. In cases where some parts are not present or are damaged,
immediately contact Your supplier and retain the packaging for verification.
WARNING!
If the product has been exposed to drastic temperature changes, let
the unit turned off until it reaches room temperature because the
presence of condensation can damage the product if it is turned on.
Verify that the box contains the following items:
N° 1 SG FLBATPLUS
N° 1 Par bracket + Knob M5x16 for locking the bracket to the projector (ref. Par. 5.5 for
installation)
N° 1 Omega holder for suspension with Par bracket
N° 1 Pendant bracket + 2 Allen screws M4x15 for locking the bracket to the projector
(ref. Par. 5.5 for installation)
N° 1 Antiglare filter (ref. Par. 5.1 for installation)
N° 1 Knob M4x8 for locking accessories and covers
N° 1 Frost filter 30° (ref. Par. 5.2 – 5.3 step 1 for installation)
N° 1 Frost filter 60°x10° (ref. Par. 5.2 – 5.3 step 1 for installation)
N° 1 Metal ring for locking frost filters
N° 1 External adapter 12,6VDC
N° 1 IR Remote controller
N° 1 User manual
To Next Page
Loading...