Sagitter FLOORBAT PLUS - Page 67

67
192 – 215
8000 K
216 – 225
9000 K
226 – 255
10000 K
7
Red
000 – 255
Red dimmer 0%...100%
8
Green
000 – 255
Green dimmer 0%...100%
9
Blue
000 – 255
Blue dimmer 0%...100%
10
White
000 – 255
White dimmer 0%...100%
11
Dimmer curves
(wait 5 seconds to
activate and store)
000 - 050
No function
051 – 100
Linear
101 – 150
Exp
151 – 200
Log
201 – 255
S-Curve
12
Control
000 – 010
No function
011 – 020
Find Me = ON (wait 5 seconds to store) (1)
021 – 030
Find Me = OFF (wait 5 seconds to store) (1)
031 – 050
No function
051 – 060
Rate 600Hz (wait 5 seconds to store)
061 – 070
Rate 1200Hz (wait 5 seconds to store)
071 – 080
Rate 240Hz (wait 5 seconds to store)
081 – 090
Rate 480Hz (wait 5 seconds to store)
091 – 100
Rate 9600Hz (wait 5 seconds to store)
101 – 110
Rate 15000Hz (wait 5 seconds to store)
111 – 130
No function
131 – 140
Battery Boost (wait 5 seconds to store)
141 – 150
Battery High (wait 5 seconds to store)
151 - 160
Battery Med (wait 5 seconds to store)
161 – 180
No function
181 – 185
Total reset (wait 5 seconds)
186 – 205
No Function
206 – 210
Factory Reset (wait 5 seconds in combination with
CH2=070)
211 – 230
No function
231 – 235
Unlink (wait 5 seconds in combination with CH2=070)
236 – 255
No function
Notes:
(1) If the FIND ME function is activated via DMX. After switching off and on again the
projector, it will be automatically deactivated, unlike what happens if the function is
activated from the Display. In this last case, however, it remains active even after the
projector is turned off.