68
8. - MAINTENANCE
To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from
the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner
or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.
- In order to have a good efficiency of the battery, it is suggested to charge the battery at least
1 time each month.
- The best performances of a Litium battery will be after 3 times of charge and discharge.
- Do not short circuit the poles of the battery in order to avoid overheating or burning. In case
of storage of battery, insulate the two poles.
- If the battery is damaged, DO NOT REPAIR. It must be replaced
9. - TECHNICAL SPECIFICATIONS
• Power Supply: External adapter 12,6VDC – 2,5A
• Battery: 12,6VDC – 5Ah
• Runtime battery:
- 2 hours approx. (full ON – boost – FIND ME off)
- 11 hours approx. (Color change – boost – FIND ME off)
• Charging cycle: approx. 5 hours
• LED: 3x15W - RGBW
• TILT Angle: 360°
• Beam angle: 10°
• 2 frost filters included: 30° - 60°x10°
• Operation Mode: Auto programs, Static colors, Master/slave, DMX512
• DMX: 3, 4, 6, 12 Channels
• Wireless DMX transceiver
• IP rating: IP65
• Al 6063 T5 aluminium
• Dimensions: mm. 120Øx119h
• Weight: kg 1,4 (without accessories)
To Next Page
Loading...
