Need help?Do you have a question about the saia-burgess PCD3 Series and is the answer not in the manual?
General| Programming Languages | Instruction List (IL), Structured Text (ST), Ladder Diagram (LD), Function Block Diagram (FBD), Sequential Function Chart (SFC) |
|---|---|
| Communication Interfaces | Ethernet, RS-232, RS-485, CAN, PROFIBUS DP |
| Power Supply | 24V DC |
| Memory | Flash memory |
| Digital Inputs | Up to 256 |
| Digital Outputs | Up to 256 |
| Analog Inputs | Up to 64 |
| Analog Outputs | Up to 64 |
Covers aspects of planning PCD3 applications, including load current and bus length.
Differentiates PCD3 base units and their ports, memory, and clock capabilities.
Describes methods for expanding PCD3.Mxxxx controllers with additional module sockets.
Covers mounting procedures, physical dimensions, and power supply details.
Details pin configurations for RS232, S-Net/MPI, Ethernet, and other ports.
Covers general backup options for user programs using onboard flash and flash cards.
Describes expansion housings, LIO module holders, RIO head stations, and diagnostics.
Details protocols supported by firmware on serial ports, including S-Bus and Profi S-Bus.
Describes the RS232 connector pin configuration and its usage for communication or programming.
Details serial interfaces on I/O module Slot 0, including RS485/422, RS232, and current loop.
To Next Page
