Need help?Do you have a question about the SAILI MOTOR LCD-SW900 and is the answer not in the manual?
General| Voltage | 24V/36V/48V |
|---|---|
| Handlebar size for Holding | 22.2 mm |
| Waterproof Rating | IP65 |
| Operating Temperature | -20°C to 60°C |
| Type | LCD |
Specifies the operating voltage range for the device, including customizable options.
Details the standard connector line sequence for connecting the controller, meter, and junction box.
Explains the purpose of each wire in the connection harness: power, control, and communication.
Lists indicators shown on the LCD: speed, battery, error, trip distance, and headlight.
Outlines configurable settings like power, headlight, cruise control, wheel size, and display.
Presents error codes and their corresponding status for troubleshooting.
Provides a table listing error codes (0-13) and their descriptions, including normal status and common issues.
Sets the maximum speed limit, or disables it (50km/h means no limit).
Long press buttons to switch between modes or turn the system ON/OFF.
Manage 6KM/H cruise, headlight, and ODO reset using specific button press combinations.
Detailed steps for entering parameter settings, modifying values, and saving changes.
To Next Page