Sailrite Ultrafeed - Install Rubber Feet; Install Hinges

1. Install Rubber Feet
• Turnthebseupsidedown
• Plcescrews
Cthroughthe
centeroftherubberfeetB
• Screwthefeettothebsetechofthe
pre-drilledholesinthebsebottom
Besurethescrewsretightenedfully
sotheywon’tscrpeyourtbletop
2. Install Hinges
• InsertonehingeDintothehingecvity
onthetopoftheWoodenBse
• Plcescrew
Ethroughtheholein
thehingendscrewintothepre-
drilledholeprovidedtosecure
• Repetthisprocessforthesecondhinge