Sailrite Ultrafeed - Install Screw Stop; Install Your Ultrafeed

3. Install Screw Stop
ThisstophelpstoprotectthetopoftheWooden
BsewhenthemchineistippedbckThere
isnoneedforkickstndwiththisbse
• Plcescrewthroughthecountersunk
wsherndsecure
Fusingthepre-
drilledholenerthestorgecvity
4. Install Your Ultrafeed
• Loosenthetwosetscrewsonthe
undersideofthesewingmchinehed
ththoldthemchinetothehingesDo
notremovethescrewscompletely
• Onthebsetipthehinge
postsslightlyupwrd
• Liftupthesewingmchinehedndcrefully
guidethehingepostsintothehingeopenings
onthebcksideofthemchinehed
• Tipthemchinehedbcknduse
stubbyscrewdriverwithmediumhed
(notincluded)totightenthesetscrews
ontheundersideofthemchinehed