SainSmart Genmitsu CNC 3018

Need help?

Do you have a question about the SainSmart Genmitsu CNC 3018 and is the answer not in the manual?

Summary

Genmitsu CNC Router 3018 User Manual

Part 1: Package List

Part 2: Assembly Instruction

1. Component: Motor Assembly

Details the assembly of the motor component.

Corner Connector, Base, Bolt, and Washer Assembly

Assembly of corner connectors, axis support bases, bolts, and washers.

2. Frame Installation Overview

Instructions for assembling the base and top frames of the CNC router.

Base Frame Assembly

Details the assembly of the base frame using specified components.

Top Frame Assembly

Details the assembly of the top frame using specified components.

Frame Installation Details

Further frame installation steps with specific connectors and dimensions.

Y-Axis Support Base Dimensions

Provides dimensions for the Y-axis support base and slide nut configuration.

X-Axis Support Base Dimensions

Details the dimensions for the X-axis support base and slide nut configuration.

Y-Axis Installation

Instructions for installing the Y-axis with linear axes, nuts, and mesa.

X;Y-axis Stepper Motor Mounting

Guides the mounting of stepper motors for the X and Y axes.

X-Z Axis Assembly Installation

Details the installation process for the X-Z axis assembly and linear axes.

Lead Screw Installation

Instructions for installing the lead screws for the X and Y axes.

Coupling Assembly

Details the assembly process for couplings, including set screws.

Bearing & Spindle Installation

Guides the installation of bearings, spindles, bolts, and slide nuts.

Control Board Installation

Instructions for installing the control board using bolts and slide nuts.

Wiring Diagrams

Illustrates the wiring connections for the spindle, motors, and power adapter.

Milling Cutter Installation

Step-by-step guide for installing the milling cutter into the copper chuck.

ER11 Tooling

ER11 Installation

Instructions for installing the ER11 into its holder and then into the motor.

Part 3: Debugging

Driver Installation

Guides the installation of the necessary driver software for the CNC machine.

Determine Machine COM Port

Steps to identify the correct COM port for your machine using Device Manager.

Grblcontrol Software Launch

Instructions on launching and configuring the Grblcontrol software for operation.

Grblcontrol Software Usage

Explains how to use the Grblcontrol software, including spindle speed and axis jog.

Grblcontrol Tool Setting

Details how to set up tools and zero the axes within the Grblcontrol software.