Need help?Do you have a question about the SainSmart INFI-20 and is the answer not in the manual?
Lists all included accessories and tools with the printer.
Visual guide identifying all major parts of the 3D printer.
Securely attach profile brackets using specified screws.
Install Y-axis fixed plate into aluminum profile and secure with screws.
Connect motor, sensor, power, and spool holder cables.
Navigate menu to select print files for execution.
Access preheating and layer test functions for printer preparation.
Manage filament loading and unloading via the prepare menu.
Control printer axis movements and home the printer.
View printer model, version, and contact information.
Step-by-step guide to load filament through the sensor and nozzle.
Calibrate by leveling and running a layer test.
Adjust belt height using the layer test function for proper adhesion.
Tighten belt tensioning screws to ensure even belt tension.
Home printer and adjust Y-axis limit switch for nozzle-platform distance.
Adjust endstop height for correct nozzle-platform gap using feeler gauge.
Adjust platform nuts counterclockwise to lift the platform.
Re-check leveling with layer test and repeat adjustments as needed.
Install SD card and slicer software, import profiles.
Copy gcode to SD card, insert into printer, and start printing.
Create a text file with SSID and password for WiFi setup.
Insert SD card, run wifi.gcode, restart for IP address.
Open browser to IP address to access the printer's web interface.
Notes for resolving issues like no IP address or connection problems.
Solutions for memory card read or format errors and file issues.
Diagnose and fix problems with motors, limit switches, and heating.
Resolve problems related to filament extrusion and belt tension.
Flowchart for diagnosing common printer failures and their causes.
General| Build Volume | 200 x 200 x 200 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD card |
| Print Technology | FDM (Fused Deposition Modeling) |
| Bed Temperature | Up to 100°C |
| Display | 3.5-inch Touch Screen |
| Power Supply | 110V / 220V |
| Nozzle Temperature | Up to 260°C |
To Next Page
