Saito Procharger 40003695 - User Manual

Lists LED patterns for voltage mismatch, faulty battery, voltage regulation issues, and current regulation issues.

Device voltage 220-240 V ~ / 50 Hz, charging current up to 1A.

Includes charger, crocodile clip cable set, eyelet connector cable set, and operating instructions.

Features I/U1/U2 charge modes with automatic battery care and maintenance.

Includes short-circuit/reverse polarity protection, test functions, and fault identification.

Use a soft cloth and mild cleaning agent; avoid strong solvents and water penetration.

Dispose of packaging domestically; the device as electronic refuse.

Connect the charger to mains power; indicated by a green 'Power' LED.

Use the slide switch to select 6 V or 12 V for the battery.

Connect red clip to positive (+) and black clip to negative (-) battery terminals.

Explains the three charge phases: I-Phase, U1-Phase, and U2-Phase.