Why can't I start or select a program on my Saivod LST1058 Washer?
If a program cannot be started or selected on your Saivod Washer, the machine may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). To cancel the current program, turn the Programme Selection knob to select another program.
What to do if the loading door of my Saivod LST1058 cannot be opened?
If you can't open the loading door of your Saivod Washer, it could be due to several reasons. The door lock might be activated because of the water level; try draining the water by running the Pump or Spin program. The machine might be heating water or in the spinning cycle, so wait until the program finishes. If the child lock is engaged, wait a couple of minutes after the program ends for it to deactivate. The door could also be stuck due to pressure; try pushing and pulling the door to release it.
Why doesn't my Saivod LST1058 drain water?
If your Saivod Washer isn't draining water, the water drain hose might be clogged or twisted; try cleaning or flattening it. Also, the pump filter could be clogged, so clean the pump filter to resolve this issue.
Why is my Saivod LST1058 leaking water from the bottom?
If you notice water leaking from the bottom of your Saivod Washer, check the water drain hose for clogs or twists and clean or flatten it. Also, the pump filter may be clogged, requiring cleaning.
How to fix a Saivod LST1058 Washer that won't drain?
If your Saivod Washer isn't draining water, the water drain hose might be clogged or twisted; try cleaning or flattening it. Also, the pump filter could be clogged, so clean the pump filter to resolve this issue.
What to do if my Saivod LST1058 Washer enters standby mode or doesn't take in water?
If your Saivod Washer enters standby mode or doesn't take in water, check if the tap is turned on and turn it on if it is off. Ensure the water inlet hose isn't bent; if it is, flatten it. Clean the water inlet filter if it's clogged. Make sure the loading door is closed properly. Finally, check the water connection; if water was cut off, press the Start/Pause key after water is supplied again.
Why is my laundry still wet after the Saivod Washer program ends?
If your laundry remains wet after the program finishes on your Saivod Washer, excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent. Use the recommended amount of detergent.
Why does my Saivod Washer immediately discharge the water it takes in?
If your Saivod Washer immediately discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
Why is my Saivod LST1058 Washer not rinsing well?
If your Saivod Washer is not rinsing well, the amount, brand, and storage conditions of the detergent might be inappropriate. Use a detergent suitable for washing machines and laundry, stored properly in a humidity-free environment, away from extreme temperatures. Ensure detergent is placed in the correct compartment. Check the pump filter and drain hose for any clogs or folds.
Why is there too much foam in my Saivod LST1058 Washer?
If too much foam forms in your Saivod Washer, it might be due to using improper detergents; use detergents specifically for washing machines. Reduce the amount of detergent used. Ensure detergent is stored properly in a closed, dry location, away from excessive heat. Some meshed laundry items may create excessive foam, so use less detergent for them. Make sure you put the detergent in the correct compartment. If softener is being taken early, there may be a problem in the valves or dispenser; call the Authorised Service Agent.
Safety instructions for preventing injuries and material damage risks related to product use.
Guidelines for safe use of the product by children and precautions for packaging materials.
Safety precautions for electrical connections, usage, and potential risks like electric shock.
Information about hot surfaces during operation and precautions for keeping children away.
Information on product compliance with the WEEE Directive for waste electrical and electronic equipment.
Details regarding the product's packaging materials and their disposal.
Comprehensive instructions for installing the washing machine.
Steps for sorting, preparing laundry, and correct loading procedures.
Guidance on selecting and using detergents, softeners, and other cleaning agents.
Advice on optimizing washing cycles for efficiency and garment care.
Detailed guide on operating the washing machine, including control panel and programmes.
Instructions for regular maintenance and cleaning of machine components.
To Next Page
General
