Inserting the Batteries
Your camera requires 3 x AAA batteries. Alkaline batteries recommended.
To insert the batteries into the camera:
1. Loosen the screw on the battery compartment cover with
a screw driver (not included) and then slide open the
battery compartment cover.
2. Insert the batteries according to the polarities (+ and -)
indicated on the inside of the battery compartment.
See image.
3. Close the battery compartment cover and then tighten
the screw to securely close the battery compartment.
Note:
Do not mix alkaline and other types of batteries.
If you do not intend to use your camera for an extended time, remove the batteries to avoid
leakage and corrosion. Make sure to first download your captured photos and videos BEFORE
removing the batteries.
To Next Page
Loading...
