9
Warning! Manufacturer doesn’t take responsibility for lost or damaged data, even if these data, etc.
have been lost during the use of this product. It is recommended to make a safety copy about the
data, tracks –located on the data storage- to your computer.
PROPER HANDLING OF USB/SD MEMORY
To avoid malfunction and errors, please observe the followings:
- Carefully read the instructions of the USB/SD storage device or media player. - Do not tap the connec-
tors with your hands or any object; keep the connectors clean. - Protect the USB/SD device from strong
shocks. - Do not bend, drop, disassemble or modify these devices, and protect them from wet!
Do not use or store the device in the following locations:
- Anywhere inside the vehicle where it is exposed to direct sunlight or high temperature. - Any place
with a high humidity or where corrosive materials are present. - Place the device in a location where
it does not hinder you by driving.
Further important notes:
- USB/microSD memory devices may not function properly at extremely high or low temperatures.
- Only use high-quality USB/microSD devices. Depending on their type and condition, even such
high-quality products may not always work properly. The proper operation of these devices is not
always guaranteed. - Depending on the type and condition of the USB/microSD device and the
settings used in the software that encoded the MP3 les, the player may not detect or play back
certain les. – Playing of copy-protected (copyrighted) les is not guaranteed. - The USB/microSD
memory device may need a certain amount of time before playback can start. If the device also
includes non-audio les, the time needed for playback to start may be signicant. - Do not remove
the USB/microSD device while playback is in progress. Switch to signal source different from USB/
microSD, and then remove the USB/microSD unit, in order to protect it from potential damage. - If
you connect a portable audio player instead of a USB/microSD memory through the USB port, and
the device has an MSC/MTP setting, choose the MTP option.
INSTALLATION (Only a specialist can install it!)
• Depending on the vehicle’s design, additional metal straps or other means of fastening may be
required. The manner of installation may differ from the instructions depending on the vehicle
model!
• Connect the unit’s wires according to the instructions. Inspect the connectors in the vehicle for
suitability according to the wiring instructions in this manual. Make sure that the connections are
properly made and free of short circuits. The speaker wiring should be conducted properly!
• It is prohibited to connect any of the speaker wires to the vehicle’s or batteries negative terminal/
grounding point! (e.g. black power cable or metal point on the vehicle)
• It is forbidden to connect any of the right and left channel’s speaker wires.
• In order to protect audio system from external noises:
- Locate the device and lead the cables at least 10 cm far from the car dashboard- cables.
- Keep the battery power cables as far from any others as you can.
- Grounding cable should be connected securely to a clean surface of the car chassis, free from
paint, dirt and grease.
- In case of connecting noise reductor, place it as far as possible from the unit, in case of noise
reduction connection.
To Next Page
Loading...