SAL VB 8000 - Technical Specifications

24
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
B
A
POWER CONNECTION FOR THE ISO PLUG
A/1. No connection
A/2. No connection
A/3. No connection
A/4. Battery direct connection for memory, +12 V (yellow)
A/5. Remote only for motor car antenne or amplifier REM, +12 V (blue)
A/6. No connection
A/7. Ignition switch, +12 V ACC(red)
A/8. Battery / Chassis GND (black)
CONNECTION OF 4 SPEAKERS FOR THE ISO PLUG
B/1. Speaker Out Right Rear +
B/2. Speaker Out Right Rear -
B/3. Speaker Out Right Front +
B/4. Speaker Out Right Front -
B/5. Speaker Out Left Front +
B/6. Speaker Out Left Front -
B/7. Speaker Out Left Rear +
B/8. Speaker Out Left Rear -
Do not connect any speaker cable to the GND of the car or the battery (with the black cable or chassis)!
FM TUNER
frequency range 87,5-108,0 MHz
FM presets 3 x 6 / FM1-FM2-FM3
Usable sensitivity 1,7 μV
Channel separation >40 dB
Signal/noise level >52 dB
USB/microSD
USB system USB 2.0
File system FAT 16/32, max.64GB
File formats MP3/WMA/FLAC/APE
Number of channels 2-CH, stereo
Channel separation >52 dB
Signal/noise level >65 dB
GENERAL PARAMETERS
Car Voltage system 12 Volt Negative GND chassis
Operation Voltage 14,4 V DC (11 -15 V)
Display dot-matrix 8 characters, 7 colors
BT version V5.0 BLE / 10m max.
BT profiles A2DP, AVRCP, PBAP, HFP, GAP, SDAP
EXT MIC input 2,5 mm mono, ~3m
Channels of amplifier 4 CH
Power output 4 x 45 W max. / 4 Ohm
Speaker impedance 4 – 8 Ohm
Frequency range 20 - 20.000 Hz
USB charger slot 3,1 A max.
Pre-amp output 1,8 V max. (2+2x RCA)
Fuse F10A
T operation 0°C …+40°C
Weight ≈600 g
Chassis dimensions 178 x 50 x 110 mm
VB 8000