Why does my Salente L5 say 'What's going on? Where is the docking station?'?
If your Salente Vacuum Cleaner displays Error 16, it means that the charging base cannot be found or is not plugged in.
Why does my Salente L5 say 'Low battery, please recharge'?
If your Salente Vacuum Cleaner displays Error 19, it means that the battery level is too low (lower than 10%) and the robot is not on the charging base, but cleaning is triggered.
What to do if my Salente L5 says 'Oh dear! Program error, please restart me'?
If your Salente Vacuum Cleaner displays Error 17, it means that abnormalities are caused by unknown breakdown. You should restart the robot.
Why does my Salente Vacuum Cleaner say 'Please check if the radar on top has been covered or blocked'?
If your Salente Vacuum Cleaner displays Error 2, it means that the top radar is covered or placed in an open area (there is not obstacle within an area of 6×6m2).
What does it mean when my Salente L5 says 'Please scrub the front sensor, and restart me from a new location'?
If your Salente Vacuum Cleaner displays Error 5, it means that the infrared avoidance sensor is dirty or covered.
What does it mean when my Salente Vacuum Cleaner says 'Please scrub the radar housing on top, and restart me from a new location'?
If your Salente Vacuum Cleaner displays Error 7, it means that the radar avoidance sensor is dirty or covered.
What does it mean when my Salente L5 Vacuum Cleaner says 'Please scrub the right-hand sensor, and restart me from a new location'?
If your Salente Vacuum Cleaner displays Error 6, it means that the wall sensor is dirty or covered.
What does it mean when my Salente Vacuum Cleaner says 'Please scrub the cliff sensor, and restart me from a new location'?
If your Salente Vacuum Cleaner displays Error 4, it means that the cliff sensor is covered or placed at height.
What does it mean when my Salente Vacuum Cleaner says 'Dust container has been removed, please clean the container and filter'?
If your Salente Vacuum Cleaner displays Error 10, it means that after error 9 is issued, the user takes out the duct chamber and error 10 is triggered.
Why does my Salente L5 Vacuum Cleaner say 'Oh dear! I cannot find the dust collector'?
If your Salente Vacuum Cleaner displays Error 1, it means that cleaning is triggered when the dust box is take out.
General| Dust capacity | 0.6 liters |
|---|---|
| Noise level | 78 dB |
| Category | Vacuum Cleaner |
| Frequency | 50/60 Hz |
| Dust container type | Bagless |
| Charging time | 4-5 hours |
| Model | L5 |
| Cord Length | Cordless |
To Next Page
