Need help?Do you have a question about the Salewa Dyneema and is the answer not in the manual?
General| Brand | Salewa |
|---|---|
| Model | Dyneema |
| Category | Safety Equipment |
| Language | English |
Use the product strictly for its intended purpose and do not exceed its limits.
Ensure correct carabiner connection and avoid obstructions. Place quickdraws and rope following the route line.
The Salewa slings comply with EN 566:2017 Standard for climbing and mountaineering.
Thoroughly inspect all parts for damage or wear before and during use. Retire if loose fibers or damage are found.
Use only for intended purpose by trained persons. Avoid sharp edges and ensure compatible equipment.
Replace immediately if in doubt, after a fall, or if modified. Do not use damaged products.
Note Dyneema's low melting point of 140°C. Avoid aggressive chemicals and extreme temperatures.
Lifespan depends on usage, environment, storage, and exposure to UV light, moisture, and dirt.
Synthetic fibers age over time due to environmental conditions and UV light exposure, even when unused.
Provides guidelines on maximum product lifespan based on usage frequency, from daily to rarely.
Wash in lukewarm water (max 30°C) and rinse with clear water if dirty or exposed to saltwater.
Store and transport the product safely, protected from damage, aggressive chemicals, and extreme temperatures.
Allow to dry at room temperature. Disinfect only with substances safe for synthetic materials.
Explanation of labels including manufacturer, tensile strength (kN), standards (EN 566), and certifications (CE, UKCA).
Details of the manufacturer (Salewa - Oberalp S.P.A.) and importer (Oberalp UK LTD).
Information on country of origin, production batch, and manufacturing dates for traceability.
To Next Page
