-9-
Setting a countdown time
The hob timer can be used as a minute minder at any time without affecting the cooking process
or power setting.
To set a minute minder countdown, press the timer button, use the plus (9) or minus
(5) button so the timer display shows “- -“.
Use the timer button, press plus and minus buttons to adjust the time by 10 minutes.
Once the desired time is set, release all buttons and after 5 seconds and the timer
countdown will be set.
The timer display will show the remaining countdown time.
When the set time is reached, a buzzer will sound for 30 seconds and the timer display
will show “- -“.
To cancel a countdown time that is in progress, press the plus and minus buttons
simultaneously.
IMPORTANT: The countdown timer controls the entire hob, rather than
an individual cooking zone. When this function is used, the hob will switch
off entering stand-by mode.
Safety cut-off
If one or more of the cooking zones are accidentally left on, a safety cut off will activate after a
certain period of time. The length of time depends on the power level that a zone or zones have
been set on.
If more than one zone is operating when one of the zones reaches its safety cut-off point, only
the zone which has reached its safety cut off point will switch off.
To Next Page
Loading...