18
DESCRIPTION
1. Rear Housing
2. Rear Metal Cover
3. Water Pan
4. Evaporator
5. Ice Shovel
6. Ice-Bin-Full Sensor
7. Front Metal Cover
8. Ice Collecting Tray
9. Water Tank
10. Filter Screen
11. Drain Plug
12. Compressor
13. Power Cord
14. Touch Panel
15. Transparent Lid
FEATURE
• Quick ice making
• Two different sizes of ice can be made
• Prompt when the ice is full and water is insufficient
• Bullet ice
• 10 pcs ice can be made in nine minutes
• Touch screen control
• Timing function and preset function
WARNING
1. During transportation, do not tilt the machine more than 45 degrees, do not reverse
the machine. This may damage the compressor and the sealing system.
2. Remove all packing materials, check the machine carefully and make sure that the
machine, power cord and plug are normal.
3. The machine should be on a level surface. To ensure sufficient ventilation, the distance
of the back of ice maker to the wall should be at least 150 mm, it should be away from
To Next Page