Need help?Do you have a question about the salmson Siriux D 80-90 and is the answer not in the manual?
General| Brand | salmson |
|---|---|
| Model | Siriux D 80-90 |
| Category | Water System |
| Language | English |
Details about the document's origin, purpose, and compliance with standards.
Explains symbols and signal words used for safety warnings within the manual.
Specifies required qualifications for personnel performing installation, operation, and maintenance.
Details risks to persons, environment, and product from not following safety instructions.
Emphasizes adherence to safety instructions, national regulations, and internal policies.
Specific safety guidelines for the end-user during product operation.
Safety precautions for personnel performing installation and maintenance tasks.
Warns against product modifications and unauthorized spare parts, voiding safety declarations.
Defines conventional use and limits that must not be exceeded for operating safety.
Explains the coding system used to identify different pump models and their specifications.
Lists essential technical specifications, operating limits, and approved fluids for the pumps.
Details the components included with the complete pump package.
Lists optional accessories available for purchase to enhance pump functionality.
Provides an overview of the pump's construction, rotor type, and integrated control.
Explains how the control module manages differential pressure based on various criteria.
Describes the different operational modes available, such as Heating and Cooling/Air-conditioning.
Details the various modes (Δp-v, Δp-c, Δp-T) for controlling differential pressure.
Explains modes like Manual control and Setback operation for optimizing energy consumption.
Covers features like overload protection, data storage, pump kick, and SSM signals.
Describes configurations and functions for pumps operating in parallel, including master/slave modes.
Defines the meaning of various symbols displayed on the pump's Liquid Crystal display.
Covers general requirements, placement, and precautions for installing the pump unit.
Provides specific steps for connecting pumps with threaded pipe unions.
Details the procedure for installing pumps using flange connections, including torque specifications.
Specifies the use of insulation materials for cooling and air-conditioning applications.
Outlines critical safety procedures and requirements for connecting the pump to the electrical supply.
Instructions for filling the system and venting the pump to ensure proper operation and prevent noise.
Guides users through navigating and adjusting settings via the control module's interface.
Explains how to operate the control button for basic settings and menu navigation.
Describes how to adjust the display orientation for different installation positions.
Details the sequence and parameters available within the pump's settings menu.
Recommends control modes (Δp-v, Δp-c, Δp-T, Manual) based on system types and conditions.
Explains how to set the pump's capacity and duty point according to system requirements.
Describes how to set a maximum volume flow limit using accessory units.
Covers safety warnings and procedures for disassembling and reassembling the pump unit.
Details the process for removing and reinstalling the pump's control module.
Lists faults, their causes, and remedies specific to Heating/Ventilation operating modes.
Lists faults, their causes, and remedies for Air-Conditioning operating modes.
Describes warning signals, their causes, and the necessary actions to eliminate them.
To Next Page
