Need help?Do you have a question about the salmson THERMO'CLOCK and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power Supply | 230V |
| Temperature Range | 5°C to 30°C |
| Accuracy | 0.5°C |
| Compatibility | Compatible with most heating systems |
Describes the intended use of the circulator for drinking water systems in single family houses.
Lists technical details such as voltage, power, pressure, and temperature ranges for the Thermo'Clock pump.
Explains the meaning of symbols used in the manual for safety and warnings to the user.
Provides guidance on checking for transit damage and storing the equipment safely to prevent issues.
Details the features and design of the Thermo'Clock pump for circulation systems, including materials and motor protection.
Explains the key functions like timer programming, blocking protection, and temperature control of the pump.
Guides on physical mounting, orientation, and placement of valves for the pump during installation.
Explains how to fill the system properly and the automatic ventilation process for the pump rotor chamber.
Covers setting the current time, initial factory settings, and the pump's default continuous operation mode.
Explains the basic operations of the tuning button for menu navigation, symbol selection, and parameter confirmation.
Details the step-by-step process for setting the current time and programmable timer switching times for pump operation.
Describes how to set the desired minimum water temperature for the pump's operation and temperature control.
Explains how to activate, deactivate, and configure the thermal disinfection support function for boiler systems.
Lists common display error codes (E36, E38, 00.00), their causes, and recommended remedies.
Covers common causes for the pump not starting, such as power interruption or faults, and their solutions.
Addresses issues related to pump noises, such as grinding or dry running, and provides appropriate remedies.
To Next Page
