Salora BTS1400 - Connection and Input Modes; Bluetooth Connection; AUX IN Mode; Supported Devices

Connection mode
The blue LED light will keep lit after the pairing is completed, if there is no
headset mark appearing on the phone screen before use, please follow below
steps to activate the Bluetooth connection.
(1) Select "SALORA BTS1400"- from the pairing list of the phone for connection
;
(2) Short press "
" button, select "accept connection" on the phone screen.
(3) To disconnect, long press "
" button or select disconnection from the
phone, the machine will go into the standby mode.
In the play mode of Bluetooth music, you can:
Short press or long press "
" or " " button to turn up/down the sound.
Press "
" button to play/pause operation.
AUX IN mode
As long as you use AUX IN line to connect with AUX IN Jack, the system
will automatically suspend the Bluetooth, the blue LED will go off and go into the
AUX IN mode, you can short press or long press "
" or " " button to turn
up/down the sound.
After you pull the AUX IN line completely out of the AUX IN Jack, the system
will reenter the Bluetooth search mode to search for the last device connected.
Supported mobile phones
iPad 1
iPad 2
iPad 3
iPhone 4
iPhone 4S
iPhone 3G
iPhone 3GS
NOKIA N95
8