Salora WMH7245 - User Manual

Questions and Answers

M
Mark HowellAug 16, 2025
Why won't my Salora WMH7245 start?
- J
  Jesse BerryAug 16, 2025
  If your Salora Washer doesn't start, there could be several reasons. Ensure the machine is properly plugged in and the fuses are working. Check that there's mains power supply. Make sure you've pressed the Start/Pause button and that the program dial is set to the desired position, not 'stop'. Finally, ensure the machine door is completely closed. If any of these are not met, the washer will not start. Plug the machine in, replace the fuses, check the mains power, press the Start/Pause button, turn the programme dial to the desired position, and close the machine door.
D
Dana BrooksAug 19, 2025
Why is my Salora WMH7245 vibrating so much?
- L
  Larry FloresAug 19, 2025
  If your Salora Washer vibrates, it might be due to a few reasons. Check if the feet of the machine have been adjusted properly. Ensure that the transit bolts, which are fitted for transportation, have been removed. Avoid setting up your washing machine on a hard surface. Also, make sure you are not overloading the drum and that the laundry is spread evenly inside. Adjust the feet, remove the transit bolts, and do not set up your Washing Machine on a hard surface. Do not overload the drum. Spread laundry evenly in the drum.
Q
qrivasAug 22, 2025
What to do if my Salora WMH7245 Washer is not taking in water?
- P
  penningtoncoreyAug 22, 2025
  If your Salora Washer isn't taking in water, first, check if the water tap is turned on. Also, the water inlet hose might be twisted, so check and untwist it. The water inlet hose or the inlet filter could also be clogged; clean them to resolve the issue. Finally, make sure that the machine door is completely closed. Turn tap on. Check water inlet hose and untwist. Clean water inlet hose filters. Clean the inlet filters. Close the machine door.
L
Lisa SchwartzAug 25, 2025
How to fix a Salora WMH7245 that won't discharge water?
- M
  Mitchell OwensAug 26, 2025
  If your Salora Washer isn't discharging water, the drain hose might be clogged or twisted; inspect it and clean or untwist as necessary. Another possibility is a clogged pump filter, which you should clean. Also, if the laundry is too tightly packed in the drum, spread it out evenly. Check the drain hose, then either clean or untwist. Clean the pump filter. Spread your laundry in the machine evenly.
T
tdiazAug 28, 2025
How to reduce excessive foam in my Salora Washer detergent drawer?
- J
  John WilliamsAug 28, 2025
  If you're seeing excessive foam in the detergent drawer of your Salora Washer, it's likely due to using too much detergent or using the wrong type. To stop the foam, dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button after 5-10 mins. Only use detergents produced for automatic Washing Machines.
S
sarah28Aug 31, 2025
Why is my Salora WMH7245 Washer not cleaning clothes properly?
- Z
  zvasquezAug 31, 2025
  If you're not satisfied with the washing results from your Salora Washer, consider whether the selected program is appropriate for the dirtiness of your laundry. Also, ensure you're using enough detergent as instructed on the packaging and that you're not overloading the machine. Use the information in the programme tables to select the most appropriate programme. Use the amount of detergent as instructed on the packaging. Check that the maximum capacity for the selected programme has not been exceeded.
M
mary43Sep 3, 2025
Why does my Salora WMH7245 Washer discharge water immediately after loading?
- K
  Kimberly HarrisonSep 3, 2025
  If your Salora Washer immediately discharges water as soon as it's loaded, it's likely that the end of the water drain hose is too low. Ensure the drain hose is at a suitable height. Check that the drain hose is at a suitable height.
S
Sara PowellSep 5, 2025
Why does my laundry have detergent residue after using my Salora WMH7245 Washer?
- R
  Ronald JacksonSep 6, 2025
  If your laundry has detergent residue after washing in your Salora Washer, it could be due to non-dissolving particles in some detergents appearing as white spots. To resolve this, perform an extra rinse or clean your laundry with a brush after it dries. Perform an extra rinse, or clean your laundry with a brush after it dries.
S
schwartzashleySep 8, 2025
Why are there grey spots on my laundry after washing in my Salora WMH7245?
- T
  taylorchristopherSep 9, 2025
  If grey spots appear on the laundry after washing in your Salora Washer, it indicates there is untreated oil, cream or ointment on your laundry. Use the amount of detergent as instructed on the packaging in the next wash.
R
rharringtonSep 12, 2025
Why is the spin cycle on my Salora WMH7245 Washer delayed or not working?
- J
  John KingSep 12, 2025
  If the spin cycle in your Salora Washer isn't happening or is delayed, it's likely because the Unbalanced Load Control system has been activated. This system tries to spread your laundry evenly. The spinning cycle will begin once your laundry is spread. For the next wash, load the drum evenly. The Unbalanced load control system will try to spread your laundry. The spinning cycle will begin once your laundry is spread. Load the drum evenly for the next wash.