Salter Labs Aire Plus 8350

To Next Page

SALTER AIRE Plus COMPRESSOR

Model 8350 / 8352 / 8353

Instruction Manual

WARRANTY

Salter Labs warrants the SALTER AIRE PLUS

Compressor to be

free from defects in workmanship and materials for a period of five

years from the date of purchase. Check with your dealer for more

details. This warranty is limited to the original purchaser of the com-

pressor. Any defective part or assembly will be repaired or replaced,

at the sole discretion and determination of Salter Labs, if the unit

has not been misused or tampered with during the period. Normal

maintenance items and disposable components are not covered by

this warranty. Shipping charges, if any, shall be paid by the pur-

chaser.

THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WAR-

RANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DU-

RATION OF THE EXPRESS LIMITED WARRANTY AND TO THE

EXTENT PERMITTED BY LAW AND ANY OTHER IMPLIED WAR-

RANTIES ARE EXCLUDED. THIS WARRANTY DOES NOT COVER

PROVIDING A LOANER COMPRESSOR, COMPENSATING FOR

COSTS INCURRED FOR COMPRESSOR RENTAL, OR FOR LA-

BOR COSTS INCURRED IN REPAIRING OR REPLACING A DE-

FECTIVE PART(S).

Thank you for selecting the SALTER AIRE PLUS

Compressor. Salter Labs is an innovative, industry-

leading manufacturer of respiratory care devices.

Please contact your local Salter Labs dealer for infor-

mation about additional products.

100 W. Sycamore Road

Arvin, California 93203 USA

Tel: 661-854-3166

800-421-0024 (in CA)

800-235-4203 (outside CA)

Fax: 661-854-3850

800-628-4690 (U.S. & Canada)

Internet: www.salterlabs.com

Salter Labs, Salter Aire Plus, NebuTech, and the Salter Labs logo are trademarks of Salter Labs

801562 Rev. G Released 3/2008

0482

Authorized Representative in the E.U.:

MT Promedt Consulting GmbH

Altenhofstrasse 80

D-66386 St. Ingbert

Germany

LISTED

Need help?

Do you have a question about the Salter Labs Aire Plus 8350 and is the answer not in the manual?

Summary

Product Warranty Information

Product Specifications

Dimensions

Physical dimensions of the SALTER AIRE PLUS® Compressor.

Weight

Weight specifications for different SALTER AIRE PLUS® Compressor models.

Free Flow Rate

Minimum free flow rate specification for the compressor.

Pressure Specification

Minimum pressure specification for the compressor.

Liter Flow Rate

Minimum liter flow rate through a Salter Labs nebulizer.

Ambient Temperature Range

Operating ambient temperature range for the compressor.

Electrical Specifications

Voltage, frequency, and amperage requirements for the compressor.

Safety Type B Rating

Indicates the type of electrical protection against electric shock.

Safety Class II Rating

Indicates double or reinforced insulation for safety.

IPX0 Rating

Indicates protection against ingress of solid objects or water.

User Information Recording

Available Accessories

Introduction to Compressor System

Device Maintenance Procedures

Filter Change Instructions

Step-by-step guide for checking and replacing the air inlet filter.

Service and Repair Guidelines

Information on authorized service and user-unserviceable parts.

Important Safety Precautions

DANGER: Reduce Risk of Fatal Injury

Critical safety warnings to prevent serious or fatal injury.

WARNING: Reduce Risk of Injury or Damage

Safety instructions to prevent personal injury or device damage.

Cleaning and Storage Procedures

Compressor Cleaning Steps

Instructions for cleaning the SALTER AIRE PLUS® Compressor unit.

Nebulizer Cleaning

Instructions for cleaning the nebulizer after each use.

Storage Guidelines

Recommendations for storing the compressor and its accessories.

Setup and Operation

System Components Overview

Identifies the key parts of the SALTER AIRE PLUS® Compressor system.

Setup Process

Step-by-step guide to prepare the compressor for operation.

Operation Instructions

How to turn on and use the SALTER AIRE PLUS® Compressor.