Salter 311 User Manual

311 Electronic Office Scale
User Instructions
Operation
1. Place the supplied batteries in the battery compartment on the bottom of
the scale. Be sure to observe battery polarity marked inside the
compartment. Replace the compartment cover.
2. Place the scale on a flat, stable surface.
3. Press the ON/TARE button.
When 0 appears, the scale is ready for weighing. See Changing Unit
of Measure below.
4. Turn the scale off by pressing the OFF button.
To perform a Tare
1. Place a container on the platform for taring and press the ON/TARE
button.
The display will return to zero, eliminating the weight of the container.
2. Put the material or object to be weighed in the container.
The net weight will be displayed.
3. Remove everything from the scale.
The display will show a negative weight.
4. Press ON/TARE again to remove the tare weight.
Scale weight returns to 0.
Auto Off
To save battery power, the scale turns off automatically approximately one and
a half minutes after the last key press or weight change.
Changing Unit of Measure
Press the UNITS button to change the unit of measure from g to kg to lb/oz.

Salter 311 Specifications

General

Brand	Salter
Model	311
Category	Scales
Language	English

Summary

Scale Operation

Basic Operation Steps

Instructions for powering on, placing the scale, and turning it off for basic weighing.

Tare Functionality

How to Tare and Untare

Steps for performing a tare operation to zero the scale with a container.

Automatic Power Off

Changing Unit of Measure

General Usage and Safety Information

Important Precautions and Warnings

Guidelines on avoiding damage, proper storage, battery replacement, and cleaning procedures.

Scale Specifications