Need help?Do you have a question about the Salter 914 and is the answer not in the manual?
Steps to set up the baby scale, including battery installation and tray attachment.
Details on how to install the 9V Alkaline battery into the scale's compartment.
Instructions for attaching and detaching the baby weighing tray using a locking key.
Guidance on the correct method to lift the scale, emphasizing support under the base.
Instructions on how to switch between different weight measurement modes (e.g., lbs/kg).
Explanation of the hold feature to lock a displayed weight reading for 30 seconds.
Guide to zeroing the scale for weighing with a nappy or vest on the baby.
Description of display messages like 'Err' for overload and 'Lo' for low battery.
Recommendations for cleaning the scale and tray using a damp cloth and avoiding chemicals.
Steps to set up the baby scale, including battery installation and tray attachment.
Details on how to install the 9V Alkaline battery into the scale's compartment.
Instructions for attaching and detaching the baby weighing tray using a locking key.
Guidance on the correct method to lift the scale, emphasizing support under the base.
Instructions on how to switch between different weight measurement modes (e.g., lbs/kg).
Explanation of the hold feature to lock a displayed weight reading for 30 seconds.
Guide to zeroing the scale for weighing with a nappy or vest on the baby.
Description of display messages like 'Err' for overload and 'Lo' for low battery.
Recommendations for cleaning the scale and tray using a damp cloth and avoiding chemicals.
To Next Page
General
