2
– Additional instructions are found in the User’s Manual, Getting Started Guide, and Help Index on Device –
– To find the Settings menu, tap the Menu button and select Settings –
Settings ⇒ Input ⇒ Timing ⇒
Select Desired
(described below) ⇒ Enable ⇒ Set Time
o Acceptance Time: length of time to hold a button down before it
activates
o Release Time: length of time required to wait between button activations
Activate on release: if checked, button will not activate until finger is lifted off
button. There is no timing adjusting required for this setting.
Menu
Settings
Input
Beep on Button Press
If checked, provides auditory feedback – button will beep when touched.
Menu
Settings
Input
Draw Button Press
o If checked, provides visual feedback – button will light up red when
touched.
Gradient Fill must be DISABLED (found in Style Settings)
Notes about Input Settings:
Menu
Settings
Speech Output
Voice
Synthesizer
Pop-up menu appears with available voice synthesizers ⇒ Select a
synthesizer (Ivona or Acapela)
Menu
Settings
Speech Output
Voice
Voice Settings
o Select the Voice dropdown ⇒ Select a voice
Adjust as needed (rate for Ivona and rate & pitch for Acapela) ⇒ Select
Notes about Speech Output Settings:
Menu
Settings
Style
Font
Font
Select desired font style from pop-up menu.
Menu ⇒ Settings ⇒ Style ⇒ Font ⇒ Font Size
in SBD
Menu
Settings
Style
Background Color
Select desired color from pop-up menu.
Menu ⇒ Settings ⇒ Style ⇒ Text Color
Select desired color from pop-up menu.
Notes about Style Settings:
Menu
Settings
System
Display Settings
Brightness
Slide bar to desired screen brightness.
Menu ⇒ Settings ⇒ System ⇒ Display Settings ⇒ Screen Timeout