1. Set the fan on a dry, level surface.
2. Plug the cord into any standard 230V~ AC outlet
3. To turn the fan on rotate the speed switch to marked (1) low, (2) medium or (3) high, To
turn the fan off rotate the speed switch to marked with (0) off.
4. The SPEED is adjusted by rotating the speed switch for your desired level of cooling
comfort.
5. To start and stop oscillation of the wind wheel, push the oscillating switch to move, To
start oscillation , push the oscillating switch to stop, stop oscillation.
6. The timer can be set to switch the fan off at any point from 120 minutes or less. To use
the fan without the timer feature set the timer knob to ON. If the timer knob is set at (0)
the fan will not work even when the speed buttons are pressed.
Speed switch
Timer
Oscillating Switch
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself.
Please refer to a qualified electrical service department or return to the supplier if
servicing is necessary.
Always unplug the fan before cleaning or assembly.
Do not allow water to drip on or into the fan motor housing.
Be sure to use a soft cloth, moistened with a mild soap solution.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in
soapy water or mild non-abrasive cleaner.
STORING THE APPLIANCE
To Next Page
Loading...
