Need help?Do you have a question about the Salton SDW12 and is the answer not in the manual?
Schematic diagram illustrating the electrical wiring and components of the dishwasher for installation.
Details the appliance's compliance with EEC directives for Low Voltage and Electromagnetic Compatibility.
Provides essential information for safe and proper installation, use, and maintenance of the appliance.
Identifies and describes the main buttons and indicator lights on the dishwasher control panel.
Step-by-step guide on how to fill the salt container located beneath the lower rack.
Instructions for adjusting salt consumption based on water hardness, referencing a table.
Instructions on how to open the dispenser and load detergent into the wash compartment.
Guidance on filling the rinse aid dispenser and adjusting its dosage for optimal drying.
Explains how proper rinse aid dosage improves drying and how to adjust for spots or streaks.
Recommendations for placing items like pots, lids, and bowls on the lower rack for effective cleaning.
Guidance on loading delicate items like glasses, cups, and saucers onto the upper rack.
Step-by-step instructions to initiate a wash cycle, including checking water supply and power.
Procedure for cancelling or changing a wash cycle setting during operation.
Steps to take after a cycle finishes, including turning off the appliance and waiting before unloading.
Recommendations for actions after each wash cycle, including turning off water and leaving the door ajar.
Emphasizes removing the plug from the socket before any cleaning or maintenance operations.
Specifies that only mild soap and water or specific dishwasher cleaners should be used for cleaning.
Advice on preparing the dishwasher for extended periods of non-use, including cleaning and unplugging.
Guidance on the correct orientation and handling when moving the dishwasher.
Suggests periodic cleaning of seals to prevent trapped food and subsequent odors.
Detailed instructions on how to clean and reassemble the dishwasher's filter system for optimal performance.
Guidance on checking and cleaning the spray arms to ensure they are free from blockages.
Procedure for cleaning the filter located at the water supply tap outlet to prevent blockages.
Checks to perform if the dishwasher fails to start, covering power, door, and switch status.
Checks for issues preventing water from entering the dishwasher, including supply and hose connections.
Checks for reasons why dishes are not getting clean, related to water supply, pressure, and filters.
Checks to perform if the dishwasher fails to drain, primarily focusing on the drain hose condition.
Checks for issues causing lime deposits or white film on dishes, such as salt container or rinse aid dosage.
Guidance on what information to provide and whom to contact if problems persist after troubleshooting.
Instructions on placing the dishwasher against the wall and adjacent cabinets for proper installation.
Guidance on adjusting the appliance's feet to ensure it is level for optimal performance.
Detailed instructions for connecting the cold water supply hose to the appliance.
Instructions for connecting the drain hose to a drain pipe or sink, including height and support requirements.
Information on connecting to a hot water line, including potential impact on wash cycle time and efficiency.
Ensuring correct voltage, frequency, and grounding for safe electrical connection to the appliance.
General| Brand | Salton |
|---|---|
| Model | SDW12 |
| Category | Dishwasher |
| Language | English |
To Next Page